{"id":8109,"date":"2026-05-02T05:05:25","date_gmt":"2026-05-02T09:05:25","guid":{"rendered":"https:\/\/plastisol-inks.com\/?p=8109"},"modified":"2026-05-07T05:10:51","modified_gmt":"2026-05-07T09:10:51","slug":"common-curing-problems-with-plastisol-ink-factory-production-guide","status":"publish","type":"post","link":"https:\/\/plastisol-inks.com\/en_gb\/common-curing-problems-with-plastisol-ink-factory-production-guide\/","title":{"rendered":"Common Curing Problems with Plastisol Ink in Factory Production"},"content":{"rendered":"<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h2>Table of Contents<\/h2><nav><ul><li><a href=\"#why-your-ink-is-failing-the-science-of-fake-dry\">Why Your Ink is Failing (The Science of &#8220;Fake Dry&#8221;)<\/a><ul><li><a href=\"#the-role-of-dwell-time\">The Role of Dwell Time<\/a><\/li><\/ul><\/li><li><a href=\"#five-massive-problems-we-see-every-day\">Five Massive Problems We See Every Day<\/a><ul><li><a href=\"#1-under-curing-and-the-stretch-test\">1. Under-Curing and the Stretch Test<\/a><\/li><li><a href=\"#2-dye-migration-the-ghost-in-the-fabric\">2. Dye Migration (The Ghost in the Fabric)<\/a><\/li><li><a href=\"#3-scorching-the-goods\">3. Scorching the Goods<\/a><\/li><li><a href=\"#4-the-humidity-trap\">4. The Humidity Trap<\/a><\/li><li><a href=\"#5-over-flashing-the-peeling-layer\">5. Over-Flashing (The Peeling Layer)<\/a><\/li><\/ul><\/li><li><a href=\"#tools-of-the-trade-comparing-your-options\">Tools of the Trade: Comparing Your Options<\/a><\/li><li><a href=\"#a-real-story-from-the-factory-floor\">A Real Story from the Factory Floor<\/a><\/li><li><a href=\"#how-to-set-your-curing-standard\">How to Set Your Curing Standard<\/a><\/li><li><a href=\"#faq-what-our-customers-ask-most\">FAQ: What Our Customers Ask Most<\/a><\/li><li><a href=\"#faq-question-1776846872321\">Q1. Why does my print feel sticky even after 90 seconds in the heat?<\/a><\/li><li><a href=\"#faq-question-1776847117764\">Q2. Can I cure plastisol ink with a heat press?<\/a><\/li><li><a href=\"#faq-question-1776847131770\">Q3. Is &#8220;Flash&#8221; the same as &#8220;Cure&#8221;?<\/a><\/li><li><a href=\"#faq-question-1776847142539\">Q4. Why is my white ink bubbling?<\/a><\/li><li><a href=\"#faq-question-1776847153052\">Q5. How do I know if my dryer is long enough?<\/a><\/li><li><a href=\"#the-bottom-line-for-your-business\">The Bottom Line for Your Business<\/a><\/li><\/ul><\/nav><\/div>\n\n\n\n<p>We know the feeling. You finish a huge order of five thousand shirts and they look perfect on the pallet. The colors pop and the lines are sharp. You ship them out and feel great but then the phone rings a week later. It is your biggest client. They are angry because the ink is falling off after just one wash. Your heart sinks. This is the nightmare of every screen printing shop owner.<\/p>\n\n\n\n<p>The good news is that we can fix this today. At&nbsp;<strong><a href=\"https:\/\/plastisol-inks.com\/en_gb\/\">HONG RUI SHENG<\/a><\/strong>, we have spent years in the trenches of factory production. We have seen every mistake in the book and we have found the solutions that actually work. If you want to stop your prints from peeling then you must master the science of heat. The short answer is simple: your ink must reach&nbsp;320\u00b0F (160\u00b0C)&nbsp;all the way through the layer. If you do this your prints will be soft and stretchy and they will last forever.<\/p>\n\n\n\n<p>Doing this right saves you money and it keeps your customers happy. It means no more expensive reprints and no more bad reviews. We are going to show you exactly how to dial in your shop for success.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1-1024x576.jpg\" alt=\"Common Curing Problems with Plastisol Ink in Factory Production\" class=\"wp-image-8112\" title=\"plastisol inks\" srcset=\"https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1-1024x576.jpg 1024w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1-300x169.jpg 300w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1-768x432.jpg 768w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1-18x10.jpg 18w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production1.jpg 1200w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption>plastisol inks<\/figcaption><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"why-your-ink-is-failing-the-science-of-fake-dry\">Why Your Ink is Failing (The Science of &#8220;Fake Dry&#8221;)<\/h3>\n\n\n\n<p>Most people think that if the ink is not sticky then it is dry. That is a dangerous lie. Plastisol ink is not like house paint. It does not &#8220;dry&#8221; by air. It is actually a liquid plastic that needs to turn into a solid through a process called polymerization.<\/p>\n\n\n\n<p>Think of it like baking a cake. If you put a cake in a very hot oven for only two minutes the outside will look cooked but the inside will be raw goop. When the customer washes that shirt the &#8220;raw&#8221; ink inside stays liquid and the whole print just slides off the fabric. We call this under-curing. It is the number one reason for failures in the industry.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"the-role-of-dwell-time\">The Role of Dwell Time<\/h4>\n\n\n\n<p>Temperature is only half the story. You also need time. We call this &#8220;dwell time.&#8221; This is how long the garment stays under the heat. If your conveyor belt is moving too fast the heat cannot soak through thick ink. You might see 320 degrees on your infrared gun but that is only the surface. The bottom of the ink layer is still cold.<\/p>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p>&#8220;True curing occurs when the ink film reaches the fusion temperature from the top all the way to the bottom.&#8221; <\/p>\n<\/blockquote>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"five-massive-problems-we-see-every-day\">Five Massive Problems We See Every Day<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"1-under-curing-and-the-stretch-test\">1. Under-Curing and the Stretch Test<\/h4>\n\n\n\n<p>This is the king of all problems. It happens when you are in a rush and you crank up the belt speed.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>The Sign:<\/strong>&nbsp;The ink looks dull after washing or it cracks when you pull it.<\/li>\n\n\n\n<li><strong>The Fix:<\/strong>&nbsp;You need to slow down. We always tell our clients to use temperature strips. These are little stickers that you put on the shirt. They change color when they hit a certain heat. They are much better than a laser gun because they go through the dryer with the shirt.<\/li>\n\n\n\n<li><strong>Best Practice:<\/strong>&nbsp;After a shirt comes out of the dryer and cools down you should grab the print and pull. If it cracks like an old eggshell it is not done. If it stretches like a rubber band then you are good to go.<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"2-dye-migration-the-ghost-in-the-fabric\">2. Dye Migration (The Ghost in the Fabric)<\/h4>\n\n\n\n<p>Have you ever printed white ink on a red polyester shirt only to have it turn pink the next day? That is dye migration.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>The Problem:<\/strong>\u00a0The heat from your dryer is so high that it turns the fabric dye into a gas. That gas floats up and stains your beautiful\u00a0<a href=\"https:\/\/plastisol-inks.com\/en_gb\/screen-printing-plastisol-ink\/\">plastisol ink<\/a>.<\/li>\n\n\n\n<li><strong>The Fix:<\/strong>&nbsp;You need to use a low-bleed ink and lower your temperatures. Many of our partners now use inks that cure at 270\u00b0F instead of 320\u00b0F. This keeps the fabric dye &#8220;locked&#8221; in the threads.<\/li>\n\n\n\n<li><strong>Internal Link:<\/strong>\u00a0Check out our guide on\u00a0preventing dye migration\u00a0for those tricky sports jerseys.<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"3-scorching-the-goods\">3. Scorching the Goods<\/h4>\n\n\n\n<p>If you try to fix under-curing by just turning the heat to the max you will burn the fabric.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>The Sign:<\/strong>&nbsp;Yellowish stains on white cotton or a shiny melted look on polyester.<\/li>\n\n\n\n<li><strong>The Fix:<\/strong>&nbsp;Lower the temperature but make the dryer tunnel &#8220;longer&#8221; by slowing the belt. Heat needs to be a gentle soak and it should not be a violent blast.<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"4-the-humidity-trap\">4. The Humidity Trap<\/h4>\n\n\n\n<p>We once worked with a factory in a very tropical area. They were failing every wash test even though their dryer was hot. We found out their cotton shirts were full of water from the humid air.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>The Problem:<\/strong>&nbsp;The dryer was spending all its energy boiling the water out of the cotton. The ink never got hot because the water was keeping it at 212\u00b0F.<\/li>\n\n\n\n<li><strong>The Solution:<\/strong>&nbsp;Run your shirts through the dryer once&nbsp;before&nbsp;you print them to dry them out. Or slow the belt down significantly on rainy days.<\/li>\n\n\n\n<li><strong>Internal Link:<\/strong>&nbsp;See how&nbsp;humidity ink storage&nbsp;affects your daily production.<\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\" id=\"5-over-flashing-the-peeling-layer\">5. Over-Flashing (The Peeling Layer)<\/h4>\n\n\n\n<p>When you print multiple colors you use a flash dryer to &#8220;set&#8221; the first color.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>The Problem:<\/strong>&nbsp;if you flash the first layer for too long it becomes hard and slick. The next layer of ink cannot &#8220;bite&#8221; into it. It is like trying to glue two pieces of glass together.<\/li>\n\n\n\n<li><strong>The Fix:<\/strong>&nbsp;Flash only until the ink is &#8220;tacky.&#8221; It should feel like the back of a sticky note. It should not be wet but it should not be hard either.<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"tools-of-the-trade-comparing-your-options\">Tools of the Trade: Comparing Your Options<\/h3>\n\n\n\n<p>If you are running a serious business you cannot guess. You need to measure. Here is how we break down the tools you should have in your shop.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td>Tool<\/td><td>Reliability<\/td><td>Why We Use It<\/td><\/tr><tr><td><strong>Infrared Laser Gun<\/strong><\/td><td>Low<\/td><td>Great for a quick check but it only sees the surface.<\/td><\/tr><tr><td><strong>Temperature Strips<\/strong><\/td><td>High<\/td><td>These tell you the actual heat reached during the trip.<\/td><\/tr><tr><td><strong>Donut Probe<\/strong><\/td><td>Elite<\/td><td>This is a wire that goes into the ink. It is the gold standard.<\/td><\/tr><tr><td><strong>The Wash Test<\/strong><\/td><td>100%<\/td><td>The ultimate proof. If it survives the wash it is cured.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"a-real-story-from-the-factory-floor\">A Real Story from the Factory Floor<\/h3>\n\n\n\n<p>We had a client who was losing $2,000 a week because of &#8220;cracked prints.&#8221; They thought our ink was bad. We went to their factory and we watched their process. They had a very short dryer and they were trying to print 300 shirts an hour. To keep up they turned the heat up to 450 degrees!<\/p>\n\n\n\n<p>The shirts were coming out smoking hot yet the ink was still wet underneath. The heat was so intense it was &#8220;skinning&#8221; the top but leaving the bottom raw. We told them to buy a longer dryer or slow down. They chose to slow down. Their production went from 300 shirts to 180 shirts an hour but their refund rate went to zero. They actually made\u00a0more\u00a0money by being slower.<\/p>\n\n\n\n<p>It taught them a valuable lesson: Quality is faster than a reprint.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"how-to-set-your-curing-standard\">How to Set Your Curing Standard<\/h3>\n\n\n\n<p>We recommend that every morning you do a &#8220;Start-up Test.&#8221; Don&#8217;t just start the day and hope for the best.<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Run a test shirt with your&nbsp;curing temperatures for plastisol ink&nbsp;settings.<\/li>\n\n\n\n<li>Wait for the shirt to cool down completely.<\/li>\n\n\n\n<li>Do the stretch test.<\/li>\n\n\n\n<li>Cut a small piece of the printed fabric and throw it in a heavy-duty washer.<\/li>\n\n\n\n<li>If it looks good then you can start the big run.<\/li>\n<\/ol>\n\n\n\n<p>Following a strict&nbsp;<a href=\"https:\/\/plastisol-inks.com\/en_gb\/screen-printing-ink-solutions\/\">ink mixing guide<\/a>&nbsp;also helps. If you add too much thinner to your ink it will change how it reacts to heat. Keep your variables consistent and your life will be much easier.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production-1024x576.jpg\" alt=\"Common Curing Problems with Plastisol Ink in Factory Production\" class=\"wp-image-8113\" title=\"plastisol inks\" srcset=\"https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production-1024x576.jpg 1024w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production-300x169.jpg 300w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production-768x432.jpg 768w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production-18x10.jpg 18w, https:\/\/plastisol-inks.com\/wp-content\/uploads\/2026\/04\/Common-Curing-Problems-with-Plastisol-Ink-in-Factory-Production.jpg 1200w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption>plastisol inks<\/figcaption><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"faq-what-our-customers-ask-most\">FAQ: What Our Customers Ask Most<\/h3>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-1776846872321\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Q<strong>1. Why does my print feel sticky even after 90 seconds in the heat?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>This usually happens if the ink is too thick or if your heating elements are getting old. Infrared panels lose their &#8220;punch&#8221; over time. Check your\u00a0plastisol ink products\u00a0to ensure no additives are separating and then check your panel&#8217;s output with a probe.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1776847117764\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Q<strong>2. Can I cure plastisol ink with a heat press?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Yes you can. But you have to be careful. Use light pressure and a teflon sheet. Usually 320\u00b0F for 20-30 seconds does the trick. It is a great way to ensure a flat and smooth finish.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1776847131770\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Q<strong>3. Is &#8220;Flash&#8221; the same as &#8220;Cure&#8221;?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>No! Flash is just to make the ink touch-dry so you can print another color on top. Curing is the final &#8220;bake&#8221; that makes the ink permanent. Never ship a shirt that has only been flashed.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1776847142539\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Q<strong>4. Why is my white ink bubbling?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>You are getting it too hot too fast. The moisture in the garment is turning to steam and it is trying to escape through the ink. Lower the heat and increase the time.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1776847153052\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Q<strong>5. How do I know if my dryer is long enough?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>If you have to turn the heat above 350\u00b0F to get a cure then your dryer is likely too short for your speed. A good dryer should allow you to stay at a steady 320-330\u00b0F for at least one full minute.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"the-bottom-line-for-your-business\">The Bottom Line for Your Business<\/h3>\n\n\n\n<p>At&nbsp;<strong>HONG RUI SHENG<\/strong>, we want you to succeed. We don&#8217;t just sell you ink and walk away. We want your factory to be a well-oiled machine. Curing problems are the most common headache in our industry but they are also the easiest to fix if you have the right data.<\/p>\n\n\n\n<p>Invest in a few temperature strips. Slow down your belt just a little bit. Always do a wash test. These small steps will put you ahead of 90% of the other shops out there. Your customers will notice the quality and they will keep coming back for more.<\/p>\n\n\n\n<p><\/p>","protected":false},"excerpt":{"rendered":"<p>Doing this right saves you money and it keeps your customers happy. It means no more expensive reprints and no more bad reviews. We are going to show you exactly how to dial in your shop for success.<\/p>","protected":false},"author":11,"featured_media":8114,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""}},"footnotes":""},"categories":[1],"tags":[150],"class_list":["post-8109","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-plastisol-ink"],"_links":{"self":[{"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/posts\/8109","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/comments?post=8109"}],"version-history":[{"count":4,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/posts\/8109\/revisions"}],"predecessor-version":[{"id":8209,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/posts\/8109\/revisions\/8209"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/media\/8114"}],"wp:attachment":[{"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/media?parent=8109"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/categories?post=8109"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/plastisol-inks.com\/en_gb\/wp-json\/wp\/v2\/tags?post=8109"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}